YIWU KAISER
Safe and efficient, economical and environmental protection, easy maintenance, new drilling equipment is worth your trust!
Products
Your current location:Home > Products
MGY60TA pneumatic top hammer

  • Feature&Introduction
  • Engine/Compressor
  • Technical parameter

MGY-60AT mainly design for large (76; 51) self-drilling anchor construction and it is a kind of  hydraulic operate pneumatic impact drilling rig. Can forward drilling for common drilling method, and can also reversal drilling for self drilling anchor. Can rotate and impact at the same time, Provide reliable drilling when drilling complicated stratum

   Feature:
1. The hammer work outside of the hole, avoid can not use hammer  when drilling through
loam stratum, improve the reliability of the hammer, reduce the problem in the hole
2. Adopt water-air combine deslagging method. There is two inlet on the power head, one for air and one for water.
3. Drill rod clamp, using the latest production of a self-centering, mechanical clamping of the mechanical clamp, more simple and reliable than hydraulic clamp

4. The feeding system is drive by track link and the hydraulic motor. The feeding stroke can be 1.7-3.5m, according to customer’s choice
5. Adopt special design, less than 100mm banking stroke of the power head. When break the rod, protect the screw
6. Adopt idler wheel when The travel of the power head, avoid wearing when adopt slide board
7. The power head and the drilling mast (rail) have itself seat, connect by bolt. The tube is joint by quick change connector. The drilling rig can move easily


MGY60TA technical data

Hole diameter

90~130mm

Hole depth

60m

Drilling rod

76*1500mm, API 2 3/8

Feeding stroke

1700~3500mm

Lifting/feeding force

50KN

Torque

3500N.m

Hammer

Air consumption:

210~360cfm

Working pressure

73-145psi

Impact energy

250-420J

Frequency

13-15Hz

Rotating speed of power head

50~400rpm

Water inlet diameter

1.5 inch

Air inlet diameter

1/4 inch

Power

22KW

Weight of the drilling rig

Drilling part

250Kg

Control desk

50Kg

Power station

400Kg

Dimension

3500*350*650mm (when stroke 1700mm)

YIWU KAISER ENTERPRISES CO.,LTD © 2011 Copyright

浙ICP备133456787号    Admin Login     Tech:浪其网络